RF Modules
CRSFv3 Protocol (Default):
ExpressLRS (ELRS)
TBS Crossfire
Tracer
Ghost
Any CRSFv3 module
Includes: Bidirectional telemetry, battery monitoring, signal warnings, and connection quality
Interface: 8-pin JR Bay, nano-sized modules
PPM Protocol (Configurable):
Legacy systems. Any PPM module.
Configure via SD card config.dat file
No telemetry or connection monitoring
Power Output:
6.6-8.4V, up to 500mA
Note: Module must operate within these specs
Requirements:
FPV drone with receiver matching your RF module
Module and receiver must be bound
Flight controller configured for Handlebar channel mapping
Module and receiver must be bound
Flight controller configured for Handlebar channel mapping
Channel Mapping
Channel
Function
Values
01
Roll
Variable
02
Pitch
Variable
03
Throttle
Variable
04
Yaw
Variable
05
Arm/Disarm
1000/2000
06
Flight mode
1000/1500/2000
Channel Mapping
Channel
Function
Values
01
Roll
Variable
02
Pitch
Variable
03
Throttle
Variable
04
Yaw
Variable
Tilt
02
Pitch
05
Arm/Disarm
1000/2000
06
Flight mode
1000/1500/2000
Lean
Roll
01
Squeeze
03
Throttle
Turn
04
Yaw
Arm Button
05
Motors spin up
Mode Switch
06
Flight mode
Flight Mode Switch:
Left: 1000 (Angle) • Center: 1500 (Acro) • Right: 2000 (Custom)
Configuration:
Use Betaflight Configurator or your flight controller software
Compatible Drones:
Racing quads, freestyle, cinematic long-range, commercial/agricultural - any FPV drone with compatible receiver
Compatible Drones:
Racing quads, freestyle, cinematic long-range, commercial/agricultural - any FPV drone with compatible receiver
OS: Windows 10+, macOS (current versions)
Connection: USB-C, plug-and-play (no drivers)
Software: Any simulator supporting game controllers (Velocidrone, Liftoff, DRL, FPV Air 2, etc.)
Flight Simulators
Batteries
Required:
2× 18650 Li-ion cells
Capacity:
2000mAh minimum, 2800mAh+ recommended
Brands:
Panasonic NCR18650BD, Samsung INR18650-29E,
L G INR18650-MJ1,
Sony VTC6
Warning:
Use only high-quality authentic cells. NOT compatible with NiMH or other chemistries
FPV Goggles
Compatible: All FPV goggles (DJI, Fat Shark, Skyzone, etc.)Goggles connect to drone's video transmitter, not the controller
Flight Controller Firmware
Compatible: Betaflight, INAV, Ardupilot, KISS, EmuFlight
Note: Configure channel mapping to match Handlebar defaults
Frequency Bands
Module-Dependent: 2.4 GHz (most common), 900 MHz/868 MHz (long-range)
User Responsibility: Select RF module legally approved for your country/region
NOT Compatible
01
Modules requiring >500mA or regulated voltage
02
Non-JR Bay connectors (without adapters)
03
Drones without compatible receivers
04
Linux, ChromeOS, iOS, Android (for Gamepad mode)
Pre-Purchase
Checklist
Required:
-
2× 18650 Li-ion batteries
-
Nano RF module (CRSF or PPM)
-
FPV drone with matching receiver
-
FPV goggles
-
Betaflight/configurator software
Optional:
-
Computer for simulators
-
Flight simulator software
Need Help?
Not sure about compatibility?
Email: support@creative-drones.com
Include: RF module model, drone/receiver model, flight controller firmware
